iSpring WGB21B 2-Stage Whole House Water Filtration System & FP15B Whole House Water High Capacity Premium PP Sediment Filter Replacement Cartridge, 4.5" x 10", White

The WGB21B is a great "point of entry" filtration system and excellent alternative to the larger WGB22B (4. 5"X20") for smaller homes or where limited space may be a concern. Unlike "point of use" systems the WGB21B will filter water directly from your source. This means that water from every outlet in your home will have passed through this filter, providing up to 50, 000 gallons of clean water for the entire family. The first stage of this system houses a 5-micron high-capacity polypropylene sediment filter (FP15B). This filter is responsible for removing dirt, rust, and most suspended solids, to protect and extend the life of the CTO carbon block filter. The second stage houses the 5-micron CTO coconut shell carbon block filter (FC15B). Block carbon is more effective than other forms of carbon in that it is finely ground up carbon packed into a solidified block. This means they have a higher density than other types of carbon filters, and are therefore more effective in removing their targeted contaminants. The carbon block filter knocks out bad tastes and odors, removes over 90% of sediment and chlorine from the water, and is highly effective on like pesticides, herbicides, and industrial chemicals. If you are on city water, your local water utility must meet very strict Federal and State standards for purity. Almost all municipally treated water is chlorinated, and this can affect taste and create odors in the water. The WGB21B filtration system will remove these tastes and odors. If you are on a private well or spring, you should have your water tested. You may also want to contact our technical staff in Atlanta, GA for help in selecting the best filter system for your water chemistry. iSpring sediment filters are manufactured to comply strictly with FDA standard (CFR - Part 177) and tested by independent third party against NSF/ANSI standard for material safety and water quality. (NSF/ANSI 42, by NSF International, 10/2018)A combination of a sparse layer, compaction layer, and precision layer ensures this iSpring premium 5-micron polypropylene sediment filter captures dirt, sand, silt, dust, rust, and scale particles effectively. Combining with other filters such as CTO filter(FC15B), iSpring fine PP sediment filter not only brings clean and refreshing water to every faucet in your home but also helps to prolong the lives of your appliances and protects plumbing from sediment and scale buildup. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.

• Product 1: [Two-Stage Effective Filtration] 1st-Stage premium 5-micron polypropylene sediment filter (FP15B) captures dirt, sand, silt, dust, rust, and scale particles and extends the life of CTO carbon block filter. Using high quality coconut shell carbon and highly compact fabrication tech, 2nd-stage CTO filter(FC15B) knocks out cloudiness as well as bad tastes and odors, removes over 90% of chlorine, and is highly effective on VOCs like pesticides, herbicides, and industrial solvents.
• Product 1: [Superb Filtration Capacity] 10"x4. 5" replaceable whole house water filters can provide up to a full year of clean water(up to 50, 000 gallons) for a family of four. 1-inch inlet and outlet ports allow fast water flow with less pressure loss. Fine PP sediment filter and premium quality CTO filter not only bring clean and fresh water to every faucet in your house, but also help prolong the lives of your water-using appliances and protect plumbing from sediment and scale buildup.
• Product 1: [Easy Installation and Filter Change] The system comes pre-assembled onto the mounting bracket for a streamlined, DIY installation. Filter wrench included to make routine filter changes easy and quick. A pressure release valve allows for the release of built-up pressure when changing filters. Refer to our manual and/or YouTube videos to Install this point-of-entry (POE) filtration system at the main water supply to get clean and healthy water for the entire family.
• Product 1: [Top-Notch Customer Service] Backed by a 30-day money-back guarantee. 1-Year manufacturer warranty and extended upon registration at iSpring. Lifetime customer and tech support from Atlanta, GA.
• Product 2: [Premium Quality Material] Complies strictly with FDA standard (CFR-Part 177) and tested by independent third party against NSF/ANSI standard((NSF/ANSI 42) for material safety and water quality. The polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
• Product 2: [Multi-layer Density Tech] A combination of a sparse layer, compaction layer, and precision layer ensures this iSpring premium 5-micron polypropylene sediment filter captures dirt, sand, silt, dust, rust, and scale particles effectively.
• Product 2: [Exceptional Filter Life] Filters up to 15,000 gallons depending on the use and feed water quality. Replace the filter every 3-6 months to achieve optimal performance. Combining with other filters such as CTO filter(FC15B), iSpring fine PP sediment filter not only brings clean and refreshing water to every faucet in your home but also helps to prolong the lives of your appliances and protects plumbing from sediment and scale buildup.
• Product 2: [Great Compatibility] Official 1-stage sediment filter for iSpring whole house water filtration system WGB21B. Fits standard 10" whole house water filtration systems. Individually sealed for freshness.